Setting Communications Parameters - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
No.
6
----End
Follow-up Procedure
After you have completed the settings, perform the following checks to confirm
whether the teamwork control is available:
1.
2.
3.
4.

5.5.4 Setting Communications Parameters

Issue 05 (2022-12-15)
Item
Background color:
red/bright gray
NO TE
If teamwork succeeds, the teamwork icon is green. If teamwork fails, the teamwork icon is
red. If teamwork mode is disabled, the teamwork icon is gray.
Check whether the number of devices in the topology is the same as the
actual number of devices.
– If yes, go to 2.
– If no, check the cable connection and the settings of teamwork control
parameters.
Check whether the number of active devices on the topology is the same as
the actual device number.
– If yes, go to 3.
– If no, check the cable connection and the settings of teamwork control
parameters.
Check whether the number of standby devices on the topology is the same as
the actual device number.
– If yes, go to 4.
– If no, check the cable connection and the settings of teamwork control
parameters.
Check whether the number of online devices on the topology is the same as
the actual device number.
– If yes, the check is complete.
– If no, check the cable connection and the settings of teamwork control
parameters.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Note
● Red indicates that the unit has generated a
critical alarm, as shown in
● Bright gray indicates that the device is
operating without any critical alarms.
5 Power-On Commissioning
.
90