Related Manuals for Altronix LINQ2
Summary of Contents for Altronix LINQ2
- Page 1 LINQ2 Two (2) Port Connectivity Ethernet/Network Communications Module Installation and Programming Manual More than just power. DOC#: LINQ2 Rev. 060514...
-
Page 2: Table Of Contents
LINQ2 Installed Inside the eFlow, MaximalF or Trove Enclosure . . . . . . . . . . . . . . . . -
Page 3: Overview
2 . Connect one end of the supplied interface cable(s) to the ports marked [Power Supply 1] and [Power Supply 2] on LINQ2 (Fig. 1, pg. 4) . When connecting to one power supply use the connector marked [Power Supply 1] . -
Page 4: Notice To Users, Installers, Authorities Having Jurisdiction, And Other Involved Parties
Reserved for future use . Not evaluated by UL . Two (2) network controlled Form “C” relays NC, C, NO (contact rated @ 1A/28VDC resistive load) . Use 14 AWG or larger . Please be sure to visit altronix.com for latest firmware and installation instructions. - 4 - LINQ2... -
Page 5: Linq2 Installed Inside The Eflow, Maximalf Or Trove Enclosure
LINQ2 - 5 -... -
Page 6: Network Setup
Altronix Dashboard USB Connection: The USB connection on the LINQ2 is used for Network . When connected to a PC via the USB cable the LINQ2 will receive power from the USB port allowing programming of the LINQ2 prior to being connected to the power supply . -
Page 7: Heartbeat Timer
Enter the default values here . Click on the button labeled Log In . 4 . The status page of the LINQ2 will appear . This page displays the real time status and health of each power supply connected to the LINQ2 . - Page 8 Altronix is not responsible for any typographical errors . 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www .altronix .com | e-mail: info@altronix .com | Made in U .S .A . MEMBER IILINQ2...
Need help?
Do you have a question about the LINQ2 and is the answer not in the manual?
Questions and answers