Appendix - LGX Extended Temperature AU910 User Manual

BIOS

Appendix

Discard Changes and Reset
Exit system setup without saving any changes.
<ESC> key can be used for this operation.
Save Options
Appendix
Restore Defaults
Restore system to factory default.
Pressing <Enter> on this item and it asks for confirmation prior to executing
this command.
Save as User Defaults
Save all current settings as user default. The current setup state can later be
restored using Restore User Defaults.
Pressing <Enter> on this item and it asks for confirmation prior to executing
this command.
Restore User Defaults
Restore system to settings previously stored by Save as User Defaults.
Pressing <Enter> on this item and it asks for confirmation prior to executing
this command.
Boot Override
This group of functions includes a list of tokens, each of them corresponding
to one device within the boot order. Select a drive to immediately boot that
device regardless of the current boot order.
- 68 - - 69 -