4.2.5 USB Configuration
Legacy USB Support
Enables support for legacy USB. AUTO option disables legacy support if no
USB devices are connected.
Settings: Enabled (Default); Auto; Disabled
EHCI Hand-Off
Allows you to enable support for operating systems without an EHCI hand-
off feature. Do not disable the BIOS EHCI Hand-Off option if you are running
a Windows® operating system with USB device.
Settings: Enabled (Default); Disabled
USB Hardware Delays and Time-outs
USB Transfer Time-out: Default setting: 20 sec.
- 56 -
BIOS
BIOS
Device Reset Time-out: Default setting: 20 sec.
Device Power Delay: Settings: Auto (Default); Manual
Mass Storage Devices
This item displays information when USB devices are detected.
4.2.6 Super IO Configuration
Parallel Port Configuration
This allows you to set parameters of the Parallel Port (LPT/LPTE).
Power On After Power Fail
After Power Failure is a power management option that will set the mode of
operation if a power loss occurs.
Settings:
- 57 -