Table of Contents
Advertisement
3.4 Wall Mounting (Optional)
1. Place the main unit upside down on a flat surface and locate the 8 screw
holes on the bottom cover.
2. Place the wall-mount brackets horizontally along the bottom cover so that
the screw holes are aligned with the ones of the bottom cover.
3. Secure the brackets to the main unit with the accompanying screws.
3.5 DIN Rail Mounting (Optional)
1. Please use the optional kit to mount the unit to a standard DIN rail.
2. Place the unit upside down on a flat surface and locate the 8 screw holes
on the bottom cover.
3. Align the screw holes of the DIN rail bracket to those of the main unit.
Secure the bracket to the main unit using the accompanying screws.
Installation and Maintenance
- 42 -
Installation and Maintenance
4. You can mount the unit on a DIN rail in the horizontal or vertical direction.
5. Fasten a pair of DIN rail clips to the DIN rail bracket that was attached to
the main unit from the previous steps. Refer to the following figures for
horizontal and vertical orientation mounting.
3.5.1 Face-Left/Right DIN Rail Mounting
1. For panel face-left/right mounting, please secure the two DIN rail clips to
the DIN rail bracket according to the illustration.
2. Position the bracket side of the unit directly in front of the DIN rail. Make
sure the top of the DIN rail clip hooks over the top of the DIN rail.
System mounted on the DIN rail
- 43 -
Advertisement
Table of Contents
