Table of Contents
Advertisement
USB Configuration
Enable or disable USB device.
4.4 Boot Settings
The Boot menu items allow you to change the system boot options.
Quiet Boot
This allows you to select the screen display when the system boots.
Fast Boot
During the POST (Power On Self Test), the BIOS checks the hardware
devices and counts the system memory. But all of these system tests are
needed every time you boot, and can be turned off to save time. When set to
Enabled, this option shortens POST by eliminating some tests.
- 64 -
BIOS
BIOS
Setup Prompt Timeout
Select the number of seconds to wait for the setup activation key.
Bootup NumLock State
This setting determines whether the Num Lock key should be activated at
boot up.
Gate A20 Active
This item is to set the Gate A20 status.
Option ROM Messages
This item is to set display mode for Option ROM.
Interrupt 19 Capture
When enabled, it allows the optional ROM to trap interrupt 19.
Boot Option Priorities
Select the boot sequence of the hard drives.
Hard Drive BBS Priorities
This allows you to set the hard drive boot priority. The BIOS will attempt to
arrange the hard disk boot sequence automatically. You can also change
the booting sequence. The number of device items that appears on the
screen depends on the number of devices installed in the system.
- 65 -
Advertisement
Table of Contents
