Table of Contents
Advertisement
Launch PXE OpROM
Enable or disable the boot option for legacy network devices.
ACPI Settings
Enable/disable the Advanced Configuration and Power Interface (ACPI).
CPU Configuration
This section is used to configure the CPU. It will also display detected CPU
information.
SATA Configuration
This section is used to configure the SATA drives.
Intel® IGD SWSCI OpRegion
Configure the Intel® graphics display.
USB Configuration
Configure the USB devices.
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard
Super I/O chip.
H/W Monitor
This section is used to configure the hardware monitoring events, such as
temperature, fan speed, and voltages.
Second Super IO Configuration
This section is used to configure the second I/O functions supported by the
onboard Super I/O chip.
Thermal Configuration
Configure the intelligent power sharing function.
- 50 -
BIOS
BIOS
4.2.1 ACPI Settings
Enable ACPI Auto Configuration
This item allows you to enable/disable ACPI (Advanced Configuration and
Power Interface) Auto Configuration.
Settings: Disabled (Default), Enabled.
Enable Hibernation
Enable or disable the Hibernation function. This allows the operating system
to control power to the computer's disk, monitor and peripheral devices.
Settings: Enabled (Default), Disabled
ACPI Sleep State
This item allows you to select ACPI Sleep State.
ACPI sleep state enables you to send the system in a low-power consuming
sleep mode.
- 51 -
Advertisement
Table of Contents
