Installing Memory Module; How To Access Cfast/Sim Card - LGX Extended Temperature AU910 User Manual

3.1.3 Installing Memory Module

1. Locate the 200-pin SO-DIMM slots and press down the clips.
2. Align the SO-DIMM on the slot and let the notch on the SO-DIMM meet
the break on the slot.
3. Hold the SO-DIMM with both hands, and gently insert it into the slot until
the clips of the SO-DIMM slot close to lock the memory module in place.
4. To remove the memory module, just press down the clips of the SO-DIMM
slot with both your hands. And then the memory module will be lifted up for
removing.
Installation and Maintenance
- 36 -
Installation and Maintenance

3.2 How to Access CFast/SIM Card

1. Make sure you have turned off the power before inserting or ejecting the
CFast card (if OS is installed on CFast card).
2. Locate the CFast card door on the front panel.
3. Use a crosshead screwdriver (#1 tip) to remove the screw that secures
the CFast/SIM card door. Pull down the door.
4. Insert your CFast/SIM card into the slot according to the illustration that
you find close to the card holder.
Insert CFast card
Insert SIM card
- 37 -