Table of Contents
Advertisement
4. Put the HDD into the HDD Holder Bracket and screw it on.
5. Insert HDD adapter to the HDD connector.
6. Hold the HDD Holder Bracket at an angle until the HDD adapter connects
to the HDD connector on mainboard.
2
3
4
7. Locate the four screws securing the HDD Holder Bracket to the main unit.
8. Screw the HDD Holder Bracket onto the Main Unit.
Installation and Maintenance
1
- 40 -
Installation and Maintenance
3.3.3 Installing PCIe Card
1. Use a crosshead screwdriver to loosen the screw that secures the expan-
sion slot bracket; then you can install a PCIe card to this expansion slot.
2. If you want to install the PCIe card to the lower slot, please push the
rubber cover out of the unit and, through the hole, use the screwdriver to
loosen the screw securing the lower expansion slot bracket.
- 41 -
Advertisement
Table of Contents
