Power On; Product Overview; Side Panel; Bottom Panel - Harman JBL RALLYBAR S Owner's Manual

RALLYBAR / RALLYBAR S-25A
RALLYBAR XL-40A
Fuse holder
18"(46cm)
Battery

4.2. Power on

Main Power Switch: Press the main power switch on the side
POWER ON
panel to turn on and turn off the speaker.
Once turn on the main power, the Power button(on the bottom
backlight will be white color and start to get slow flash, which
shows the speaker is on Deep standby mode.
Note: on the Deep standby mode, only the MAP Light can be
turned on/off by short pressing light button.
Press Power button: Press the power button, the backlight of
the power button will become constant white, which shows that
the speaker is on operation mode.
Off
White (Flashing)
White (Constant)
Red (Constant) (15 seconds)
1
Chassis ground (–)
Off
On
2
×1
3
Main power switch is off
Main power switch is on-
(Deep standby mode)
Operation mode on
Protection: OVP/UVP/OTP

5. PRODUCT OVERVIEW

5.1 Side panel

1
1. USB
• Connect to a USB storage device.
2. Aux-in
• Connect to an external audio device through a 3.5mm audio
cable (not supplied).
3. Aux-out
• Connect to a secondary soundbar, amplified Subwoofer
through a 3.5mm audio cable (not supplied)
4. Power
• Connect to vehicle battery.
5. Main Power Switch
• Press to switch power on and power off. is power on,
power off.
6. Input Level
• Provides 3 different Gain settings when use AUX-IN to
connect with head unit: 2V, 4V, and 6V. (2Vrms: 0.35Vrms -
2Vrms; 4Vrms: 0.7Vrms - 4Vrms; 6Vrms: 1.05Vrms - 6Vrms)

5.2 Bottom Panel

NO. BUTTON Short Press
1 Press to decrease
the volume level one
by one
2 Press to play or pause
the music.;
Press twice to play the
next track.;
Press three times to
play the previous track.
3 Press to increase
the volume level one
by one
4
2 3
6
2 3 4 5 6 7
1
Long press
decreasing volume
continually (Press and
hold 1 second)
Increasing volume
continually (Press and
hold 1 second)
4
5
is