Replacing The Hard Drive; Procedure; Post-Requisites - Dell W15B Service Manual

Replacing the hard drive

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the
hard drive.

Procedure

1 Align the screw holes on the hard drive with the screw holes on the hard-
drive bracket .
2 Replace the screws that secure the hard-drive bracket to the hard drive.
3 Align the tabs on the hard-drive assembly with the slots on the display-
assembly base.
4 Slide the hard-drive assembly toward the edge of the computer to secure
it to the display-assembly base.
5 Replace the screw that secures the hard-drive assembly to the display-
assembly base.
6 Connect the power and data cable to the hard drive.
7 Route the touch-board cable through the routing guides on the hard-
drive bracket.

Post-requisites

1 Replace the back
2 Follow the procedure in step 4 in
3 Replace the stand.
computer. After working inside your
cover.
"Replacing the optical
After working inside your
drive".
29