Table of Contents
Advertisement
Quick Links
Installation and
Care Instructions
Country Woods
Wood Blinds
QUARTER
ARCH
ARCH
OCTAGON
HEXAGON
Fixed Slat
Specialty Shapes
®
TRIANGLE
ANGLE
CIRCLE
OVAL
THANK YOU for purchasing a Hunter Douglas product. Your
new blind has been custom built for you from the highest quality
materials to provide you with a lifetime of beauty and function.
Important: Read these instructions all the way through before
beginning.
Getting Started
Remove the blind from the package. Keep the packaging until the
blind is installed to your satisfaction.
Each fixed slat specialty shape you ordered includes:
• The required number of slats, cut to varying widths to form the
correct shape.
• Two or more uprights into which the slats are inserted.
• Arch, quarter arch, angle, and triangle only: One bottom rail to
which the uprights are attached, along with two flat head screws
(#6 x 1
1
/
") per upright to attach the uprights to the bottom rail;
4
and one extra 2" slat for light control.
Each fixed slat specialty shape you ordered also includes all necessary
mounting hardware:
• The required number of mounting brackets. There are two types
of brackets, one for inside mounts and one for outside mounts.
• Two #6 x 1
/
" hex head screws per mounting bracket.
1
4
• One snap button per mounting bracket.
MOUNTING BRACKET
(Inside Mount)
SLATS
(Arches, Quarter Arches, Angles, Triangles only)
Tools needed for installing your blind:
• Measuring tape
• Pencil
• Flat blade screwdriver
• Phillips screwdriver
In addition, you will need fasteners designed to work with your
specific mounting surfaces:
Mounting Surface
Wood
No. 6 Hex Head Screws
(Provided)
Drywall, Plaster
Wall Anchors, Expansion Bolts
(Not Provided)
Metal
Sheet Metal Screws
(Not Provided)
MOUNTING
BRACKET
(Outside Mount)
UPRIGHT
BOTTOM RAIL
• Carpenter's level
• Power drill, drill bits and
/
1
bit socket (or socket wrench with
/
" hex socket)
1
4
Fastener
SNAP
BUTTON
" hex
4
Advertisement
Table of Contents
Related Manuals for HunterDouglas Country Woods
Summary of Contents for HunterDouglas Country Woods
- Page 1 • The required number of slats, cut to varying widths to form the correct shape. • Two or more uprights into which the slats are inserted. Country Woods ® • Arch, quarter arch, angle, and triangle only: One bottom rail to...
- Page 2 7:00 AM to 4:30 PM MST, Mon.-Fri. up and the countersunk holes toward you. • Labels indicating the position of the uprights are located on the Visit our Web site at hunterdouglas.com top of the bottom rail, near the front edge. FRONT EDGE...
- Page 3 Notice on the chart that: Optional Additional Slat Instllation • A blind with two uprights will have snap buttons installed onto Arch, Quarter Arch, Angle, and Triangle both. An additional slat labeled “extra” is included with your order. This • Blinds with three to six uprights will have snap buttons installed slat is the same length as the bottom rail.
- Page 4 (see illustration). Like any wood furnishings, Country Woods blinds should be cleaned • Position the brackets on your marks so that the circular opening on a routine basis to keep them looking new.
Need help?
Do you have a question about the Country Woods and is the answer not in the manual?
Questions and answers