Scope Of Delivery; Technical Data; General Safety Instructions; Safe Operation - Parkside 354669-2010 Operation And Safety Notes

Scope of delivery

1 Drill sharpener
2 Replacement bricks
1 Instructions for use

Technical data

Dimensions:
Total weight:
Brick:
Rated voltage:
Rated power:
Rated idle
speed:
For drill Ø:
Protection class:
Noise emission value:
The A-rated noise level of the power tool
is typically:
Load (grinding):
Noise level L :
pA
Uncertainty K :
pA
Sound power level L
WA
Uncertainty K :
WA
115 x 128 x 175 mm
(W x D x H)
1055 g
53 g
220–240 V∼ (AC)
50 Hz
95 W
n 1350 min
-1
0
3–13 mm
II /
61.2 dB (A)
3 dB
: 74.2 dB (A)
3 dB
General safety
instructions
WARNING! When using electric tools basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
personal injury including the following. Read
all these instructions before attempting to op-
erate this product and save these instructions.

Safe operation

1. Keep work area clear
Cluttered areas and benches invite injuries.
2. Consider work area environment
Do not expose tools to rain.
Do not use tools in damp or wet locations.
Keep work area well lit.
Do not use tools in the presence of
flammable liquids or gases.
3. Guard against electric shock
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radiators,
ranges, refrigerators).
4. Keep other persons away
Do not let persons, especially children,
not involved in the work touch the tool
or the extension cord and keep them
away from the work area.
5. Store idle tools
When not in use, tools should be stored
in a dry locked-up place, out of reach of
children.
6. Do not force the tool
It will do the job better and safer at the
rate for which it was intended.
7. Use the right tool
Do not force small tools to do the job
of a heavy duty tool.
GB/IE 17