Haier GE GDF510P M4 Series Service Manual page 27

Lower Rack
Several lower racks are available with different
tine configurations; consult the Owner's Manual
for details on the lower racks.
The lower rack roller assemblies consist of
brackets, rollers, and covers (left or right, two per
side) as well as rollers (four per side).
To remove the lower rack rollers, lift up on the
cover (shaded grey in the image below) to
release; then pull out on the cover to unclip the
center tabs.
Tabs in center
The rollers will slide off the bracket and the
bracket (shaded grey in the image below) is
pushed to the rear of the rack to remove.
The left and right brackets and covers are
different part numbers and are marked "L" or
"R" (left or right) on the inside to insure proper
installation.
Bracket
Rollers
Cover
– 27 –
Left Side
Right Side