Section 3 – Configuration
For a PPPoA connection, first choose the PPPoA option under ATM Interface Configuration in order to view the parameters to configure for this
connection type.
Click the PPPoA radio button to see the following selections.
VPI: Enter the correct VPI used in this field.
VCI: Enter the correct VCI used in this field.
Select DSL Link Type: Select the correct DSL Link Type here. For
PPPoE Mode select PPPoA.
Encapsulation Mode: Choose the appropriate Encapsulation Mode
here.
Service Category: Choose the appropriate Service Category here.
Enable Quality of Service: Tick this option to enable Quality of Service.
Enter Service Description: This field will display an automated service
description.
D-Link DSL-2730B User Manual
PPP over ATM (PPPoA)
33