Mac Filtering - D-Link DSL-2730B User Manual

Section 3 – Configuration
To access MAC Filtering, point to the Advanced Wireless on the left window and click MAC Filtering submenu, or click the MAC Filtering button
in the Wireless Settings window.
This page can help you to allow or deny certain MAC addresses to pass
through or block out.
Click Add at the bottom of the window to enter MAC address. Click
Apply at the bottom of the page to add the MAC address to the wireless
MAC filtering list.
Select Enable Wireless MAC Filter and click the Only ALLOW
computers listed to access wireless network or Only DENY
computers listed to access wireless network of the filtering policy.
Click Apply to save the settings. Go to Maintenance -> System and
click Reboot to restart the device and let the new settings take effect.
D-Link DSL-2730B User Manual

MAC Filtering

52