D-Link DSL-2730B User Manual page 53

Section 3 – Configuration
Enable Wireless: Tick the check box to enable the wireless feature of
this device. In the drop down menu select the appropriate schedule for
when the wireless feature of this device should be enabled or disabled.
Click the Add New button to go to Advanced -> Schedules page to
configure more schedules.
Wireless Network Name (SSID): Enter a wireless network name
(SSID).
Visibility Status: Click the radio buttons to make the wireless network
visible or invisible.
User Isolation: Use the drop-down menu to enable (On) or disable (Off)
wireless user isolation.
Enable: Tick to enable Wi-Fi Protection (WPS, also known as WCN).
Current PIN: The current PIN for WPS is displayed.
Generate New PIN: Click this button to generate a new WPS PIN.
Wi-Fi Protected Status: The current status of WPS is displayed.
Reset to Unconfigured: Click this button to disable WPS.
Add Wireless Device Wizard: Click this button to add a new wireless
device using WPS.
D-Link DSL-2730B User Manual 50