Page 1
MIDIS110 & MIDIS240 INDUSTRIAL DUST EXTRACTION VACUUM CLEANER Please read this manual before using the MIDIS110 & MIDIS240 All Errors & Omissions Excused – Speci cation May Change Without Notice – Please Refer To www.v-tuf.co.uk For the Latest Version...
Page 2
VTVS7023(5M) HOSE - 5M 32mm Yellow Vacuum Hose With End To Fit WND/1 - for NEW MIGHTY, NEW MIDI FLOOR HEAD - 420MM WIDE Wet & Dry WITH WHEELS V-TUF 32 MM BIO324WD WND/1 V-TUF PROFESSIONAL TUBE SET - 32MM STAINLESS STEEL 3 PIECE...
3. Make sure that the electrical data of the appliance, shown on the label, corresponds to those of the mains supply. 4. The appliance must only be used with V-TUF accessories and spare parts as these ensure safe and perfect operation.
Page 8
Ø32mm Accessories Kit Power Cable Safety Instructions These instructions are for the user’s safety, and all users of the V-TUF cleaning equipment should ensure to have read this literature before using the machine. Do not use with a damaged cable.
SAFETY PRECAUTIONS Caution: what to do 1. All power conduction parts must be protected against water. SHORT-CIRCUIT RISK. 2. All services or maintenance performed on the appliance must always be done with the plug disconnected from the power supply. 3. Operation with a residual current circuit breaker provides extra protection for the operator (I_n=30 mA).
TROUBLESHOOTING PROBLEM PROBABLE CAUSE PROBABLE SOLUTION The machine does not No current. Check main fuse, power start cord, plug and outlet. The machine suddenly Because of overheating, After the machine has stops the thermal protection cooled down, you can turns the turn the power on again Machine off (feature only and begin to use the...
The use of this device for the elimination of dusts must be performed in rooms or environments which are sufficiently ventilated whenever the device’s exhaust returns into the environment itself. The user must respect the current national regulations in the country in which the device is being employed. The equipment’s end user must be read and understood for its use before beginning any work activities, taking note of the safe usage regulations.
Page 12
- B) AUT – 0 – MAN switch: in the 0 position, the device is off; in the AUT position, the device turns on automatically whenever the connected electrical or pneumatic power tool is activated; in the MAN position, the device requires manual activation. - A) Electrical outlet with maximum available power indicator;...
Page 13
MAINTENANCE: FILTER REMOVAL ATTENTION Be careful to not stir up dusts when performing cleaning operations, filter checks or filter replacements. Use a protective mask. Or a V-TUF filter cleaning box. Replacing the filter bag Undo the head clips and remove the head.
Page 14
Remove the used filter bag and close the inlet with the tag as shown below. Dispose of the bag in the correct manner. Fit the new filter bag, making sure that the bag’s membrane seal fits perfectly over the internal slot of the tank inlet and that the bag fits neatly around the edge of the tank internal.