Automatic Programmes - Gaggenau BM450 User Manual And Installation Instructions

en Automatic programmes
Use to select "Cooking time"
10.
Use the rotary selector to set the required cooking
11.
time.
Press to confirm.
12.
a The main menu for the sequential operation is dis-
played. The settings for the phases are shown on
the display bar.
Press to start.
13.
a The appliance starts. You can see the cooking time
counting down.
a Once the cooking time has elapsed, the appliance
switches off. A signal tone sounds. If you press
open the appliance door or set the function selector
to , you can end the signal early. The operation
has finished.
Notes
¡ You can add the combined operation to the sequen-
tial operation.
¡ You can only select the 1000 W microwave output
setting once.
¡ You cannot combine the oven types of heating with
the 1000 W microwave output setting.
¡ The order of each setting is entirely up to you. You
can start the duration, microwave output setting or
oven type of heating.
¡ If you open the appliance door during cooking, the
fan may continue to run.
Changing sequential operation
Press ⁠ .
1.
a The operation stops.
Use the rotary selector to set the cooking time, tem-
2.
perature or grill setting.
Press and change the settings.
3.
Use to exit the menu.
4.
Press to start.
5.
Deleting settings
Press ⁠ .
▶
Interrupting the operation
To interrupt the operation, press ⁠ .
1.
Press to resume operation.
2.
Cancelling the operation
To stop the operation and delete the settings, turn
▶
the function selector to ⁠ .
Note: The fan can also continue to run when the door
is open. This is normal.
13

Automatic programmes

The automatic programs help you prepare different
dishes and automatically select the optimal settings.
13.1 Information on Automatic programmes
Follow these tips to achieve optimal cooking results:
¡ Only use food that is in perfect condition.
14
⁠ .
,
12.2 Cooking time end
In oven mode, you can delay the cooking time end to a
later time. This function is not available in combination
with the microwave.
Enter the cooking time and delay the cooking time end
until 15:30, for example. The electronics system calcu-
lates the start time. The appliance starts automatically
at 14:50 and switches off at 15:30, for example.
Do not leave food which spoils easily in the oven for
too long.
Delaying the cooking time end
Requirement: The type of heating, temperature and
cooking time are set.
Use to select "Cooking time end"
1.
Use the rotary selector to set the required cooking
2.
time end.
Press to confirm.
3.
a The display shows a notification that a cooking time
end has been set.
Press to confirm.
4.
Press to start.
5.
a The appliance switches to standby. The display
shows the operating mode, the temperature, the
cooking time and the remaining time until the start.
a The appliance starts at the calculated time and
automatically switches off once the cooking time
has elapsed.
a Once the cooking time has elapsed, the appliance
switches off. A signal tone sounds. If you press
open the appliance door or set the function selector
to , you can end the signal early. The operation
has finished.
Changing the cooking time
Press ⁠ .
1.
Use to select "Cooking time"
2.
Use the rotary selector to set the required cooking
3.
time.
Press to confirm.
4.
Press to start.
5.
Changing the cooking time end
Press ⁠ .
1.
Use to select "Cooking time end"
2.
Use the rotary selector to set the required cooking
3.
time end.
Press to confirm.
4.
Press to start.
5.
Deleting settings
Press ⁠ .
▶
Cancelling the entire procedure
Turn the function selector to ⁠ .
▶
¡ Take the food out of its packaging and weigh it. If
you cannot set the exact weight on the appliance,
round the weight up or down.
¡ Only use microwave-safe, heat-resistant cookware,
e.g. made of glass or ceramic.
¡ Place the food in the cold cooking compartment.
⁠ .
,
⁠ .
⁠ .