Table of Contents
Advertisement
Set the required cooking time end using the rotary
2.
selector.
Press ™ to confirm.
3.
A message is shown in the display to warn that a
cooking time end has been set. Press ™ to confirm.
4.
Start with I.
The appliance switches to standby. The display shows the
operating mode, the temperature, the cooking time, and
the remaining time until the start. The appliance starts at
the calculated time and automatically switches off once
the cooking time has elapsed.
Once the cooking time has elapsed, the appliance
switches off. An audible signal sounds. The signal stops
early if you touch the ™ symbol, open the appliance door,
or set the function selector to 0. The sequential operation
has finished.
Changing the cooking time:
Touch the H symbol. Use C to select the 6 "Cooking
time" function. Set the required cooking time using the
rotary selector. Press ™ to confirm. Start with I.
Changing the end of cooking time:
Touch the H symbol. Use C to select the 5 "End of
cooking time" function. Set the required cooking time
end using the rotary selector. Press ™ to confirm. Start
with I.
Deleting the settings:
Touch the ' symbol.
To cancel the entire procedure:
Set the function selector to 0.
30
Automatic programs
You can prepare food really easily using the automatic
programs. You select the program and enter the weight of
your food. The automatic program then applies the most
suitable settings. You can select from 15 programs.
Note: The weight can only be set in kg.
Setting a program
Set the function selector to any operation mode.
1.
Note: The function selector must not be moved to ž
or S.
Touch the i "Chef's hat" symbol; the automatic
2.
programs are displayed.
3.
Press ™ to confirm.
The first program appears in the display.
4.
Use the rotary selector to select the required program,
e.g. Cooking: "Fresh vegetables".
Touch % to select the n "Weight" function.
5.
Turn the rotary selector to set the weight.
6.
7.
Press ™ to confirm.
Start with I.
8.
The operation begins. The cooking time starts
counting down.
An audible signal sounds once the cooking time has
elapsed. The signal stops early if you touch the ™
symbol, open the appliance door, or set the function
selector to 0. The program has finished.
Advertisement
Table of Contents
