Motorola CLP Series Manual page 6

Cloning Radios using the Multi Unit Charger (MUC)
Charging/Cloning
Pocket
Note: This MUC allows you to clone up to 2 radios (2 source radios and 2 target radios).
1. To put the source radio into clone mode, press and hold PTT and the "-" button while turning
the radio ON until you hear the Cloning Tone and Double Blinking Yellow
Status Glow.
2. Place the source radio into one of the charging pockets that has the "CLONE" label.
3. Turn the target radio ON and place it in the pairing charging pocket that has the "CLONE" label
and start the cloning process.
4
English
IXPN4029_
on the Smart