Absolute Maximum Rating - Sharp LS013B7DH01 Manual

5. Absolute Maximum Rating

Table5-1 Absolute Maximum Rating
Item
Power
Analog
supply
voltage
Input signal voltage(high)
Input signal voltage(low)
Strage Temperature
Operation Temperature
(at panel surface)
[Note 5-1] Applies to EXTMODE.
[Note 5-2] Applies to SCLK, SI, SCS, DISP, EXTCOMIN.
[Note 5-3] Do not exceed this temperature in any parts of module.
[Note 5-4] Humidity 95%RH Max.(Ta ≦ 40℃)
Attention should be paid to static electricity
Maximum wet bulb temperature is 39℃ or lower. No condensation is allowed.
Condensation will cause electrical leak and may cause the module to not meet this specification.
[Note 5-5] Operating temperature is the temperature that guarantees only for the operation.
For contrast, response time, and other display quality determination, use Ta＝＋25℃.
©Copyright 2017 SHARP All rights reserved
Symbol
VDDA
Logic VDD
VIH
VIL
Tstg
Topr
SPEC No. MODEL No.
LD-29608A
Min
-0.3
-0.3
－
-0.3
-30
-20
LS013B7DH01
Max Unit
+5.8 V
+5.8 V
VDD V
V
－
℃
80
℃
70
PAGE
13
( GND＝0V )
Remark
[Note 5-1]
[Note 5-2]
[Note 5-3]
[Note 5-4]
[Note 5-4]
[Note 5-5]