Absolute Maximum Rating - Sharp LS013B7DH01 Technical Literature

5. Absolute Maximum Rating

Table5-1 ( GND＝0V )
Item
Power Analog
supply
Logic
voltage
Input signal voltage(high)
Input signal voltage(low)
Strage Temperature
Operation Temperature
(at panel surface)
[Remark5-1] Applies to EXTMODE.
[Remark5-2] Applies to SCLK, SI, SCS, DISP, EXTCOMIN.
[Remark5-3] Do not exceed this temperature in any parts of module.
[Remark5-4] Maximum wet bulb temperature is 57℃ or lower. No condensation is allowed.
Cndensation will cause electeical leak and may cause the module to not meet this specification.
[Remark5-5] Operating temperature is the temperature that guarantees only for the operation.
For contrast, response time, and other display quality determination, use Ta＝＋25℃.
SPEC No.
LCP-2110019B
Symbol MIN.
VDDA -0.3
VDD -0.3
-0.3
Tstg -30
Topr1 -20
MODEL No.
LS013B7DH01
MAX. Unit
+5.8 V
+5.8 V
VDD V
V
+80 ℃
+70
℃
PAGE
9
Remark
[Remark5-1]
[Remark5-2]
[Remark5-3,4]
[Remark5-5]