Applocable Memory Liquid Crystal Display; Characteristics; Mechanical Specification - Sharp LS013B7DH01 Manual

1. Applocable Memory liquid crystal display

This TFT-LCD module is a reflective active-matrix memory liquid crystal display
module with CG silicone thin film transistor. Module outline is indicated in Figure 8-2

. Characteristics

・ Reflective active-matrix with slightly transmissive panel.
・ 1.26" screen has 144 x 168 resolusion. (24,192 pixels stripe array)
・ 1 pixel has each 1bit, the pixel can display 2 colors.
・ Display control by serial data signal communication.
・ Arbitrary line data renewable.
・ 1bit internal memory for data storage within the panel.
・ Thin, light-weight and compact module with monolithic technology.
・ Super low power consumption TFT panel.
・ Front polarizer surface is Antiglare.
・ Zebra connector (Recommended zebra connector : "section 8-3)" )

3. Mechanical Specification

Table 3-1 Module mechanical specification
Screen size
Active Area
Dot configuration
Dot pitch
Pixel Array
Display mode
Outline Dimension
Mass
Surface Hardness
Surface treatment
(Note) Detail dimension and tolerance are shown in Figure.8-2
©Copyright 2017 SHARP All rights reserved
Item
1.26"
20.88(W) × 24.36(H)
144(H) x 168(V)
0.145(H) × 0.145(V)
Square
Normally White
24.88(W) × 33.00(H) × 1.64(D)
3.0
at least (3H) (initial)
AG
SPEC No. MODEL No.
LD-29608A
Specification
LS013B7DH01
inch
mm
Dot
mm
-
-
mm
g
Pencil hardness
-
PAGE
9
unit