Installing The Add-On Card (With 0.5U Bracket) - Supermicro AOC-AG-i4S User Manual

Super AOC-AG-i4S(M) User's Manual

3.4 Installing the Add-on Card (with 0.5U bracket)

Follow the steps below to install an add-on card into your system. (If the system is fixed onto
a rack, the removal of the server top cover is not required. If the system is not anchored to
a fixed structure, it is recommended to remove the system top cover for ease of installation).
A. Uninstalling an AIOM module
1. Unscrew the blue knob from the system.
2. Pull on the tab and a knob evenly on both sides of the card to disengage the AIOM
module from the motherboard connector.
3. Gently slide the AIOM module out.
Pull tab to
engage/disengage
Screw knob to
engage/disengage
24
Remove the AIOM
card from this slot
The AIOM card with
the 0.5U bracket
installed