Supermicro AOC-AG-i4S User Manual page 26

Super AOC-AG-i4S(M) User's Manual
C. Installing an AIOM module (an AIOM slot with an AIOM slot
cover)
1. Remove the AIOM slot cover by unscrewing the knob and screw that attaches the
bracket to the chassis. Pull the bracket away and set it aside.
2. Position the AIOM module in front of the empty slot and gently push it onto the metal
bracket. The AIOM module should slide into the chassis until the card is securely seated
in the connector.
3. Press the blue knob and secure it onto the chassis by turning the knob clockwise.
Note 1: This AIOM module does not support the hot plug. Please turn off the AC
power and remove the power cord from the wall socket before installing or removing
an AIOM module.
Note 2: Graphics shown above are for illustration purposes only. Actual products may
vary due to product enhancement.
Pull tab to
engage/disengage
Screw knob to
engage/disengage
26
AIOM 0.5U slot cover