Before Installation; Installing The Add-On Card - Supermicro AOC-STGC-i2T User Manual

3.2 Before Installation

To install the add-on card properly, be sure to follow the instructions below.
1. Power down the system.
2. Remove the power cord from the wall socket.
3. Use industry-standard anti-static equipment (such as gloves or wrist strap) and follow
the instructions listed on page 3-1 to avoid damage caused by ESD.
4. Familiarize yourself with the server, motherboard, and/or chassis documentation.
5. Confirm that your operating system includes the latest updates and hot fixes.

3.3 Installing the Add-on Card

Follow the steps below to install the add-on card into your system.
1. Remove the server cover and, if necessary, set aside any screws for later use.
2. Remove the add-on card slot cover and its screw.
3. Position the add-on card in the slot directly over the connector and gently push down on
both sides of the card until it slides into the PCI connector.
4. Secure the add-on card to the chassis. If required, use the screw that you previously
removed.
5. Attach any necessary external cables to the add-on card.
6. Replace the server cover.
7. Plug in the power cord and power up the system.
23
Chapter 3: Installation