Installing The Add-On Card (With 1U Bracket) - Supermicro AOC-AG-i4S User Manual

3.3 Installing the Add-on Card (with 1U bracket)

Follow the steps below to install an add-on card into your system. (If the system is fixed onto
a rack, the removal of server top cover is not required. If the system is not anchored to a
fixed structure, it is recommended to remove the system top cover for ease of installation).
A. Uninstalling an AIOM Module (Slot with AIOM module
installed)
1. Slide the black latch to the left to the "unlock" position.
2. Disengage the AIOM module from the chassis structure by pushing the blue latch once
to extend it outward.
The latch to engage/
disengage the AIOM
module
Remove the AIOM
card from this slot
The AIOM card with
the bracket installed
21
Chapter 3: Installation