Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Supermicro AOC-A100G-m2CG
Summary of Contents for Supermicro AOC-A100G-m2CG
- Page 1 AOC-A100G-m2CM AOC-A100G-m2CG User's Guide Revision 1.0b...
- Page 2 Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
- Page 3 100GbE controllers in the market. Based on the Mellanox ConnectX-6 Dx controller with features such as VXLAN, NVGRE, and RDMA, it provides unparalleled density, performance, and functionality. The Supermicro ® AOC-A100G-m2CM/G is the industry’s most secure and advanced cloud network interface card to accelerate mission-critical datacenter applications, such as security, virtualization, SDN/NFV, big data, machine learning, and storage.
- Page 4 Product safety info: http://www.supermicro.com/about/policies/safety_informa- tion.cfm • If you have any questions, please contact our support team at: support@ supermicro.com This manual may be periodically updated without notice. Please check the Supermicro website for possible updates to the manual revision level.
- Page 5 Preface Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and to prevent damage to the system or injury to yourself: Warning: Important information given to ensure proper system installation or to prevent damage to the components or injury to yourself. Note: Additional information given to differentiate between various models or provides information for correct system setup.
- Page 6 Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) Sales-USA@supermicro.com (Sales Inquiries) Government_Sales-USA@supermicro.com (Gov. Sales Inquiries) support@supermicro.com (Technical Support) RMA@supermicro.com (RMA Support) Webmaster@supermicro.com (Webmaster) Website: www.supermicro.com...
- Page 7 Preface Asia-Pacific Email: Sales-Asia@supermicro.com.tw (Sales Inquiries) Support@supermicro.com.tw (Technical Support) RMA@supermicro.com.tw (RMA Support) Website: www.supermicro.com.tw...
-
Page 8: Table Of Contents
Super AOC-A100G-m2CM/G Add-On Card User's Guide Table of Contents Preface Chapter 1 Introduction Overview ......................1-1 Key Features ....................1-1 Additional Features ..................1-2 Available SKUs ....................1-4 Chapter 2 Hardware Components Add-On Card Image and Layout ..............2-1 Major Onboard Components ................2-3 QSFP28 Ethernet Connections ............... -
Page 9: Chapter 1 Introduction
Introduction Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry. Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Key Features The key features of this add-on card include the following: •... -
Page 10: Additional Features
Super AOC-A100G-m2CM/G Add-On Card User's Guide Additional Features General • Advanced I/O Module (AIOM) form factor • Mellanox ConnectX-6 Dx 100GbE controller ® • Dual QSFP28 ports Storage Accelerations • NVMe over Fabric offloads for target • Storage protocols: iSER, NFSoRDMA •... - Page 11 Chapter 1: Overview Management and Control • NC-SI, MCTP over SMBus, and MCTP over PCIe – Baseboard Management Controller interface • PLDM for Monitor and Control DSP0248 • PLDM for Firmware Update DSP026 • I2C interface for device control and configuration Remote Boot •...
-
Page 12: Available Skus
2-port 100 Gigabit Ethernet Adapter with a 0.5U height bracket. AOC-A100G-m2CG BKT-0205L 2-port 100 Gigabit Ethernet Adapter with a 0.5U height narrow bracket for Grand Twin FIO systems. Note: This product is sold only as part of an integrated solution with Supermicro server systems. -
Page 13: Chapter 2 Hardware Components
Chapter 2: Hardware Components Chapter 2 Hardware Components Add-On Card Image and Layout AOC-A100G-m2CM Image AOC-A100G-m2CG Image... - Page 14 Super AOC-A100G-m2CM/G Add-On Card User's Guide PRESS FIT PRESS FIT JPAUX1 J1A2 J1A1 AOC-A100G-m2CM DESIGNED IN USA REV:1.00 AOC-A100G-m2CM/G Layout...
-
Page 15: Major Onboard Components
Chapter 2: Hardware Components Major Onboard Components AOC-A100G-m2CM/G Major Components Component Name Definition Mellanox ConnectX-6 Dx 100GbE controller JPAUX1 1-2: Enable AUX Power 2-3: Disable AUX Power J1/J1A1 Quad Small Form-Factor Pluggable 28 Port 1 J2/J1A2 Quad Small Form-Factor Pluggable 28 Port 2 LED1 QSFP28 Port 1 Link LED... -
Page 16: Qsfp28 Ethernet Connections
Super AOC-A100G-m2CM/G Add-On Card User's Guide QSFP28 Ethernet Connections Two Quad-Small-Form-Factor-Pluggable 28 (QSFP28) connectors are located on the add-on card. The QSFP28 ports operate at up to 100GbE. Plug the Direct At- tached Copper (DAC) cable into the QSFP28 ports for network connections. See the layout below for the location. -
Page 17: Ports And Port Leds
Chapter 2: Hardware Components Ports and Port LEDs QSFP28 Ports Two QSFP28 adapter ports are located on the AIOM Form factor card. Connect a Direct Attach Copper cable or an LC Fiber-Optic cable to the ports to provide 100 Gigabit Ethernet communication. Refer to the AIOM Form factor card layout on page 2-2 for the location of the QSFP28 port. -
Page 18: Jumper Settings
Enable = Enable jumper to WoL is supported but limited to plat- Standby power connect standby forms with sufficient airflow when it is to AOC NIC power to AOC NIC in standby mode (S5 state). Please consult Supermicro before enabling it. -
Page 19: Pcie 4.0 Aiom Form Factor Connector
Chapter 2: Hardware Components PCIe 4.0 AIOM Form Factor Connector Insert the PCI-E 4.0 AIOM form factor connector into a PCIe 4.0 AIOM form factor slot on a motherboard to use this AIOM Form factor card. See the layout below for the location. -
Page 20: Chapter 3 Installation
Chapter 3: Installation Chapter 3 Installation Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid dam- aging your add-on card, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD. Precautions •... -
Page 21: Before Installation
Super AOC-A100G-m2CM/G Add-On Card User's Guide Before Installation To install the add-on card properly, be sure to follow the instructions below. 1. Power down the system. 2. Remove the power cord from the wall socket. 3. Use industry-standard anti-static equipment (such as gloves or wrist strap) and follow the instructions listed on page 3-1 to avoid damage caused by ESD. -
Page 22: Installing The Add-On Card
Chapter 3: Installation Installing the Add-on Card Follow the steps below to install an add-on card into your system. (If the system is fixed onto a rack, the removal of the server top cover is not required. If the system is not anchored to a fixed structure, it is recommended to remove the system top cover for ease of installation) A. - Page 23 Super AOC-A100G-m2CM/G Add-On Card User's Guide B. Installing an AIOM module 1. Position the AIOM module in front of the empty slot and gently push onto the metal bracket. The AIOM module should slide into the chassis until the card is securely seated in the connector.
- Page 24 Chapter 3: Installation C. Installing an AIOM module (An AIOM slot with an AIOM slot cover) 1. Remove the AIOM slot cover by unscrewing the knob and screw that attaches the bracket to the chassis. Pull the bracket away and set it aside. 2.
-
Page 25: Installing Drivers (For Mellanox ® Connectx-6 Dx)
Super AOC-A100G-m2CM/G Add-On Card User's Guide Installing Drivers (for Mellanox ConnectX-6 Dx) ® To install drivers for the AOC-A100G-m2CM/G add-on card for either Linux or Win- dows, please follow the instructions below. - Page 26 Chapter 3: Installation Linux Drivers Use the following procedures to install the 100GbE driver on the Linux (RedHat/ CentOS) operating system. 1. We recommend downloading the latest Mellanox Driver directly from the ® Mellanox website: https://mellanox.com/products/infiniband-drivers/linux/ mlnx_ofed. 2. Download and extract /untar the MLNX_OFED***.tgz package. 3.
- Page 27 (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com- munication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.
Need help?
Do you have a question about the AOC-A100G-m2CG and is the answer not in the manual?
Questions and answers