Installing Drivers On Linux (For Intel ® I350Am4) - Supermicro AOC-AG-i4S User Manual

Super AOC-AG-i4S(M) User's Manual
3.6 Installing Drivers on Linux (for Intel
Download the drivers from Intel Download Center or the Supermicro site at
supermicro.com/wftp/Networking_Drivers.
Build a Binary RPM Package
1. Run 'rpmbuild -tb <filename.tar.gz>'
2. Replace <filename.tar.gz> with the specific filename of the driver.
Note: For the build to work properly, the current running kernel MUST match the ver-
sion and configuration of the installed kernel sources. If you have just recompiled the
kernel, reboot the system at this time.
Follow the instructions below to build the driver manually.
1. Move the base driver tar file to the directory of your choice. For example:
/home/username/ig
or
/usr/local/src/igb
2. Untar/unzip archive, where <x.x.x> is the version number for the driver tar file:
tar zxf igb-x.x.x.tar.gz
3. Change to the driver src directory, where <x.x.x> is the version number for the driver tar:
cd igb-x.x.x/src/
4. Compile the driver module:
make install
The binary will be installed as:
/lib/modules/[KERNEL_VERSION]/kernel/drivers/net/igb/igb.[k]o
The install locations listed above are the default locations. They may not be correct for
certain Linux distributions. For more information, see the ldistrib.txt file included in the
driver tar.
i350AM4)
®
28
https://www.