MOTO GUZZI V100 Mandello Instruction Manual page 54

1.1) Headlamp mode - where required
This function is used to set the operating mode of the lights.
The use mode can be selected by shortly pressing the MODE RIGHT button. These
modes will be displayed cyclically every time you press the button.
Auto = Automatic
Manual = Manual
Emergency = Emergency; (emergency mode must only be used in the event of a
02_60
malfunction of the headlamp; and enables usage of the low beam headlights and DRL
lights only)
Press MODE SET briefly to go back to the main MENU.
NOTE
THE RELATIVE ICON IS SHOWN ON THE DIGITAL DISPLAY WHEN "AUTO"
MODE IS ACTIVE.
1.2) Shift light
This function is used to set the rotation threshold; if this is exceeded, the engine rpm
bar will flash and the immobilizer indicator light will switch on.
The threshold can be increased by shortly pressing the MODE RIGHT button.
Once the maximum rotation number is reached, the threshold starts again from 4000
rpm.
Press MODE SET briefly to exit edit mode.
02_61
54