Advertisement

Product Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYPHN and is the answer not in the manual?

Questions and answers

Summary of Contents for Monitor Audio HYPHN

  • Page 1 Product Manual...
  • Page 2: Table Of Contents

    Welcome to Hyphn Register your Hyphn speakers to ensure the best possible product and customer support Thank you for purchasing our Hyphn speaker system, you’re now ready to start your journey to breathtaking sound. Register your speakers using the QR code Hyphn is a peerless, definitive, uncompromising demonstration of the Monitor Audio Group’s...
  • Page 3: Unboxing

    Unboxing WARNING: DO NOT attempt to lift the loudspeaker alone. We strongly recommend at least four people to unpack and manoeuvre them. It is strongly recommended to place each loudspeaker relatively close to the optimum listening position when unpacking to minimise the amount they have to be moved. The handles on the sides of the cartons can be used to lift the cartons off the transit pallet and into position.
  • Page 4: Setting Up Your System

    Setting up your system 2-channel system With the speaker sitting on the Magic Sliders, it is possible to “slide” the speaker into position with massively reduced resistance other than the weight of the speaker. When arranging a 2-channel system, the listening position and the loudspeakers should form an equilateral triangle.
  • Page 5: Spikes & Feet

    Spikes & feet Use on carpeted floors Levelling the speaker The outriggers are supplied assembled with spikes, fitted to the cabinet for use on carpeted You can check that the loudspeaker is level on all sides by using a spirit level (not supplied). If floors.
  • Page 6: Wiring Your Speakers

    Bi-wiring is accomplished by connecting separate pairs of loudspeaker cables to the terminals on the loudspeaker from a single pair of connections on the amplifier. In the case of Hyphn, the bottom terminals connect to the bass driver(s) and the top terminals connect to the mid and tweeter.
  • Page 7: Using Your Speakers

    Be careful not to damage the driver units whilst cleaning. This can be done naturally over time: like a fine wine the performance will improve Never use solvents or aggressive cleaning/polishing agents on your Hyphn loudspeakers. When with age. in doubt, test the cleaning product on an inconspicuous area on the cabinet, and let it sit for...
  • Page 8: Specifications

    Warranty Specifications In the unlikely event that there is a defect with this product, it is covered by the Monitor Audio Model manufacturer’s warranty, provided that the product was supplied by an authorised Monitor Audio Hyphn retail specialist. Sensitivity (2.83 Vrms @ 1 m) 86 dB For the period of cover please refer to the product page on our website at monitoraudio.com...
  • Page 9 Listen Again. Monitor Audio Ltd. 24 Brook Road Rayleigh, Essex SS6 7XJ England Tel: +44 (0)1268 740580 Email: info@monitoraudio.group monitoraudio.com ©Monitor Audio Ltd. | V1-2023 - Hyphn...

Table of Contents