Verkada AC42 Install Manual page 9

Installation
Mounting 1/4
Use the paper mounting template from the hardware
box to get a sense of the wall space AC42 will occupy.
Use the mounting template to drill pilot holes for the
mount plate.
Use the supplied screws to install the mount plate
onto the wall.
Once attached, the enclosure will extend down
roughly 16" (~40cm), from the top of the mount plate.
The size of the enclosure is:
16.5" x 12,5" (42 x 32 cm)
9
Please Note Leave at
minimum 2" clearance on the
left side of the enclosure in
order for the door to open
and close without hindrance.
Please Note The supplied screws are
intended for plywood installations.
For other wall materials, ensure proper
load-bearing fasteners are used.
Verkada Inc. 406 E 3rd Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.