Verkada AC42 Install Manual page 22

Installation
Connect
Connect the AC42 to your network using the Ethernet port located at the bottom of the controller.
Connect the AC42 power supply to your standard power outlet (100-240VAC).
To add the AC42 to your Verkada Command account, enter the serial number printed on the AC inlet (or
the order number) to the "Add Device" page: command.verkada.com/add-device
22
Ethernet
Serial Number
QR Code
Verkada Inc. 406 E 3rd Ave, San Mateo, CA 94401
sales@verkada.com
AC Inlet
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.