Daisy Chaining - Verkada AC42 Install Manual

Installation
FAI set up 2/2
Latching
An optional latching input from the FACP may be connected in a normally closed configuration
across L and L. When latching is enabled, FAI is active; it will remain active until reset. A reset is
achieved if FAI is deactivated and the latching input is temporarily open.
Important -
FAI+ and FAI_P must
be locally jumpered
in this config

Daisy Chaining

Two AC42 FAI may be daisy chained. The FAI (and latching states) from the primary AC42 will be
repeated in the secondary (daisy chained) unit.
Important -
FAI+ and FAI_P must
be locally jumpered
in this config
21
AC42
AC42
Verkada Inc. 406 E 3rd Ave, San Mateo, CA 94401
sales@verkada.com
AC42 FAI Daisy Chain
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
AC42
AC42