Vents-us TwinFresh Expert RW1-50 V.2 User Manual page 16

The table below shows the buttons on the remote control with a detailed description of their purpose and functionality.
ON/Standby. The
The same button is used to reset alarms (Alarm) and turn off the timers.
Ventilator speed selection: Speed III-II-I respectively.
Regeneration mode
TwinFresh Expert
The rotation direction of both fans changes to opposite every 70 seconds. Heat recovery is performed in this
mode. The fan rotation direction depends on the position of the DIP switch 3.
TwinFresh Expert Duo
The rotation direction of both fans changes to opposite every 70 seconds. Heat recovery is performed in this
mode.
Ventilation mode
TwinFresh Expert
The ventilator operates in the supply or extraction mode at a set speed. The fan rotation direction depends on
the position of the DIP switch 3.
TwinFresh Expert Duo
One of the ventilator fans operates in exhaust mode, the other in supply mode at the selected speed without
changing the direction of air flow.
Timer control buttons:
default. The timer setting may be changed during setup of the unit on mobile device.
default.
The timer setting may be changed during setup of the unit on mobile device.
The ventilation unit reverts to operation with a previous speed setting upon elapse of the set time period.
Press any speed setting key to deactivate the timer or press the timer control button once again.
Download the Vents Home application and install it on the mobile device.
The ventilator works as a Wi-Fi access point named FAN by default: + 16 ID Number characters) stated on the ventilator casing under the
front panel.
Wi-Fi access point password:
To connect, follow the instructions in the mobile app. In the app, you can configure the ventilator to connect via your home Wi-Fi network
and via a cloud server.
The ventilators must be connected to the Smart home system in compliance with user's manual for this application.
16
REMOTE CONTROL OF THE VENTILATOR
Standby
mode depends on the position of the DIP switch #2 (see "DIP switch position" section).
Party mode:
the timer activates operation of the ventilation unit at Speed III for a set time period, 4 hours by
Night mode:
the timer activates operation of the ventilation unit at Speed I for a set time period, 8 hours by
REMOTE CONTROL OF THE VENTILATOR WITH A VENTS HOME APP
Vents Home – App Store
11111111.
CONTROLLING THE VENTILATOR USING THE SMART HOME SYSTEM
TwinFresh Expert (Duo) R(M)W1-30/50/85/100(C1) V.2
Vents Home – Play Market
www.vents-us.com