Warranty card ....................................13 This user’s manual is a main operating document intended for technical, maintenance, and operating staff. The manual contains information about purpose, technical details, operating principle, design, and installation of the Airvents RH unit and all its modifications.
Page 3
MANUFACTURER’S LABEL. ANY TAMPERING WITH THE INTERNAL CONNECTIONS IS PROHIBITED AND WILL VOID THE WARRANTY. INSTALLATION ONLY BY EXPERTS AND ONLY IN ACCORDANCE WITH LOCAL REQUIREMENTS AND NATIONAL ELECTRICAL CODE. DISCONNECT THE UNIT FROM POWER SUPPLY BEFORE ANY MAINTENANCE OPERATIONS! www.vents-us.com...
Page 4
Airvents RH ENSURE THAT THE UNIT IS SWITCHED OFF FROM THE SUPPLY MAINS BEFORE REMOVING THE GUARD. FOLLOWING THE REGULATIONS STIPULATED HEREIN WILL ENSURE A LONG AND TROUBLE-FREE OPERATION OF THE UNIT. USER’S WARRANTY CLAIMS SHALL BE SUBJECT TO REVIEW ONLY UPON PRESENTATION OF THE UNIT, THE PAYMENT DOCUMENT AND THE USER’S...
AV02 RH 2500 50.8 56.7 54.7 15.8 51.2 49.6 27.6 AV03 RH 3500 AV07 RH 5000 55.9 61.8 59.8 19.8 81.9 55.7 39.4 AV07 RH 6000 The full technical data list is stated in the supplied technical data sheet. www.vents-us.com...
Airvents RH UNIT DESIGN AND OPERATION LOGIC UNIT DESIGN 1: protective dampers with electric actuator [optional] 2: extract fan 3: rotary heat exchanger 4: supply filter 5: control unit 6: extract filter 7: supply fan www.vents-us.com...
During installation works sufficient maintenance and service access must be provided. The recommended minimum distances from the unit to the walls are shown below. Casing dimensions 02 RH 03 RH 07 RH The delivery set includes removable levelling feet to adjust horizontal levelling of the unit. www.vents-us.com...
Airvents RH CONNECTION TO POWER MAINS Connection to power mains must be conducted in compliance with the automation user’s manual. TECHNICAL MAINTENANCE WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: BEFORE REMOVING THE FILTERS, SWITCH OFF THE EXTERNAL...
The unit can be transported only in the working position. • Avoid sharp blows, scratches, or rough handling during loading and unloading. • Prior to the initial power-up after transportation at sub-zero temperatures, allow the unit to warm up at operation temperatures for at least 3-4 hours. www.vents-us.com...
Page 12
Airvents RH MANUFACTURER’S WARRANTY Production meets standard operating requirements in the USA and Canada. Blauberg warrants to the original purchaser of the unit that it will be free from defects in materials or workmanship for a period of 24 months from the date of original purchase. The Blauberg warrants to the original purchaser of the unit that the integrated control unit will be free from defects in materials and workmanship for a period of 24 months from the date of original purchase.
The unit has been installed in accordance with the provisions of all the applicable local and national construction, electrical and technical codes and standards. The unit operates normally as intended by the manufacturer. Signature: WARRANTY CARD Unit Type Air handling unit Model Serial Number Manufacture Date Purchase Date Warranty Period Seller Seller’s Stamp www.vents-us.com...
Need help?
Do you have a question about the Airvents RH and is the answer not in the manual?
Questions and answers