Sherman digitec DIGIMIG 2OO HIT User Manual page 3

Machine Translated by Google
• Use protective curtains made of non-combustible materials and properly choose the colors of the walls
absorbing harmful radiation.
Prevention of poisoning by vapors and gases emitted during welding from the coating of electrodes
and evaporation
of metals: • Use ventilation devices and extractors installed at workstations with limited exchange
air,
• Blow with fresh air when working in confined spaces (tanks). • Use masks and respirators.
Burn prevention: • Wear
appropriate protective clothing and footwear to protect against radiation burns
arc and spatter,
• Avoid staining clothing with greases and oils that may lead to its ignition.
Explosion and fire prevention: • It is
forbidden to operate the device and perform welding in rooms with explosion hazard or
fire,
• The welding station should be equipped with fire-fighting equipment, • The
welding station should be located at a safe distance from flammable materials.
Preventing the negative impact of noise: • Use
earplugs or other means of protection against noise, • Warn people
nearby about the danger.
WARNING!
Do not use a power source to thaw frozen pipes.
Before starting the device, you should: •
Check the condition of electrical and mechanical connections. It is forbidden to use handles and power cords
with damaged insulation. Improper insulation of the handles and power cords may result in electric shock,
• Ensure proper working conditions, ie ensure proper temperature, humidity and ventilation in the place
work. Protect against precipitation outside closed rooms,
• Place the charger in a place where it can be easily operated.
Persons operating the welder should: •
have qualifications for electric welding using the MIG/MAG method, • know
and comply with health and safety regulations applicable to welding work, • use appropriate,
specialized protective equipment: gloves, apron, rubber boots, shield
or a welding helmet with a properly selected filter, • know
the content of this manual and use the welder in accordance with its intended use.
Any repairs to the device may only be made after disconnecting the plug from the power socket.
When the device is connected to the mains, it is forbidden to touch any elements forming the welding current
circuit with bare hands or wet clothing.
It is forbidden to remove external covers when the device is connected to the mains.
Any modifications of the rectifier on one's own are prohibited and may constitute a deterioration of safety
conditions.
All maintenance and repair works may only be carried out by authorized persons, observing the safety
conditions applicable to electrical devices.
It is forbidden to operate the welder in rooms with explosion or fire hazards!
The welding station should be equipped with fire extinguishing equipment.
After finishing work, the device's power cord must be disconnected from the mains.
The hazards and general health and safety rules presented above do not exhaust the issue of welder's work safety, as
they do not take into account the specificity of the workplace. An important supplement to them are workplace health
and safety instructions as well as training and instruction provided by supervisory employees.
3