Sherman digitec DIGIMIG 2OO HIT User Manual page 14

Machine Translated by Google
Spot welding. Pressing the welding torch button will ignite the arc. After the time SPt has elapsed, the arc will be
extinguished. Releasing the gun button early will extinguish the arc immediately.
F - Multifunction knob.
The knob is used to adjust welding functions and parameters. During MIG/MAG welding in manual mode, it is
used to adjust the wire feed speed. When welding in the synergic mode and in the MMA and TIG methods, it is
used to adjust the welding current.
Pressing the button causes the transition to adjustment of other parameters and functions. The selection of a
parameter or function is signaled by lighting up the appropriate diode under one of the displays.
G - Welding voltage knob
14