Gears; Tire Pressure; Front Cargo Rack Assembly - Igo ELITE 3D hd User Manual

ADJUSTING YOUR ELECTRIC BIKE

GEARS

Your eBike comes equipped with a Shimano Altus 8 speed drivetrain. The trigger shifter
mounted to your right handle will allow you to change gears. It is important that you
only change gears while pedaling as the chain must be in motion to properly shift gears.
To shift up a gear, pull the trigger closest to your index finger.
To shift down a gear, push the trigger closest to your thumb.

TIRE PRESSURE

The tire pressure will affect the range and comfort of your bike.
iGO recommends that you always keep your tires at the designated pressure to
ensure the best ride. The recommended tire pressure is listed on the sidewall
of the tire. The tire pressure is measure in P.S.I. (Pounds / Square Inch).
Make sure to use a tire pressure gauge when pumping
your tires to fill the proper amount of air.
ATTENTION! Riding on deflated / soft tires will
severely reduce the range of the battery.

FRONT CARGO RACK ASSEMBLY

Fig. 21.1
Your bike comes equipped
with a front cargo rack.
It can be used to transport items or
parcels up to 9 kg ( 19.8 lbs ) in weight.
Identify the 4 front rack bolts and 4 washers.
Slide a washer onto each bolt and using the
4mm allen key insert bolt #1 into position,
figure 21.1 and slightly tighten bolt . Following
the pattern in figure 21.1 attach all 4 bolts
Do not tighten until all 4 bolts are in place.
Making sure front rack is centered
tighten all 4 bolts.
21