Gears; Tire Pressure - Igo Elite User Manual

Gears

Your eBike comes equipped with a Shimano Altus 8-speed drivetrain.
The trigger shifter mounted to your right handle will allow you to change
gears. It is important that you only change gears while cycling as the chain
must be in motion to properly shift gears.
To shift up a gear, pull the trigger closest to your index finger.
To shift down a gear, push the trigger closest to your thumb.

Tire Pressure

The tire pressure will affect the range and comfort of your bike.
iGO recommends that you always keep your tires at the designated pressure
to ensure the best ride. The recommended tire pressure is listed on the
sidewall of the tire. The tire pressure is measure in P.S.I. (Pounds / Square Inch).
Make sure to use a tire pressure guage when pumping your tires to fill the
proper amount of air.
ATTENTION! Riding on deflated / soft tires will severely reduce the
range of the battery.
Front Cargo Rack assembly
Your bike comes equipped with a front cargo rack.
It can be used to transport items or parcels up to 9 kg ( 19.8 lbs ) in weight.
*An instructional video for mounting the front cargo rack &
light can be found at : http://www.igoelectric.com/buildmyelite
Identify the 4 front rack bolts and
4 washers. Slide a washer onto each
bolt and using the 4mm allen key
insert bolt #1 into position, fig-
ure 19.1 and slightly tighten bolt .
Following the pattern in figure 19.1
attach all 4 bolts Do not tighten
untill all 4 bolts are in place.
Making sure front rack is centered
tighten all 4 bolts.
19