Igo ELITE 3D hd User Manual page 31

Table of Contents

Advertisement

REPLACEMENT PARTS
A list of replacement parts can be found on the iGO website:
www.igoelectric.com/partslist/elite3Dhd
or by contacting:
iGO TECHNICAL SUPPORT
tel: 1 866 996 6686
WARNING - When using this product, basic precautions
should always be followed, including the following:
Read all the instructions before using the product.
To reduce the risk of injury, close supervision is necessary
when the product is used near children.
Do not put fingers or hands into the product.
Leave indoors when charging or not riding.
Do not use the charger if the flexible power cord or output cable is
frayed, has broken insulation, or any other signs of damage.
Only use a charger supplied or recommended by the manufacturer.
The battery is intended to be charged when the ambient temperature
is between 0°C (32°F) and 30°C (86°F). Never charge the battery
when ambient temperatures are outside this range.
This equipment is not intended to be used at ambient temperatures less
than -10°C (14°F) or above ambient temperatures of 50°C (122°F).
(phone lines open Mon-Fri 9:00 am - 5:00 pm EST )
email: support@iGOelectric.com
IMPORTANT SAFETY INSTRUCTIONS
31

Advertisement

Table of Contents
loading

Table of Contents