Front Led Light Installation - Rack Mount - Igo ELITE 3D hd User Manual

ADJUSTING YOUR ELECTRIC BIKE

FRONT LED LIGHT INSTALLATION - RACK MOUNT

To attach the LED light to the front rack
of your iGO electric bike position the
light as shown in fig. 23.1 and insert
the screw through the rack mount
and light bracket then tighten the
bolt using the Allen key provided.
Fig. 23.2
Once the light is correctly in place secure the cable to the underside
of the front rack using 4 zip ties as shown in fig. 23.3
Fig. 23.3
Fig. 23.1
Join the female connector of the light cable to the
male connector coming from the bike frame (fig. 23.2)
ensure this cable is situated on the left side of the bike
and is not twisted around the bike frame or fork.
ATTENTION! Ensure the connector pins are
correctly aligned (fig. 23.2) when attaching.
Misalignment will seriously damage the
pins and the light will not function.
23