Page 1
Thank you for buying smarTrike. Ⓡ ® If you have any assembly questions, please contact us at any time. help@smart-trike.com USA: 1-855-SMTRIKE (1-855-768-7453) USA: 1-855-SMTRIKE Find us at @smarTrike (1-855-768-7453) Watch a live assembly ! Scan this code to view a step-by-step visual guide, and assemble your product easily.
Page 4
Step 1-3 Parts needed to complete this section Remove the bolt from the trike’s body. Insert the wheel axel into the trike’s body up to the marked center. Fasten the bolt back in place. Attach part M to the Front rear axel until it “clicks”.
Page 5
Step 4 Parts needed to complete this section Repeat on the other side Firmly screw in O with P . Make sure not to lose the screws Use V to release 4 screw .
Page 6
Step 5-6 Parts needed to complete this section Make sure the arrow sticker direction on the handlebar. Use the bolt to attach the Use the bolt to attach the Remove the bolt from handlebar. handlebar. Lock the screw with P (clockwise). the handlebar stem.
Page 7
Step 7 Parts needed to complete this section Put the screw on the slot of the connector. Front Insert the steering wheel to the trike body. Scan this code to Watch a live guide With the red button on the right Insert part “...
Page 8
Step 8 Parts needed to complete this section Cover the connector. insert, slightly turn until you insert, a. Release the safety belt holder screw Repeat on the other side b. and thread the screws through the belt and belt holder Turn the apple to face you.
Page 9
Step 9-10 Parts needed to complete this section a. Push the button to release the plastic cap. Repeat on the other side b. Pull out the plastic cap. Scan this code to Watch a live guide 15m+ 15m+ Insert and turn the pedals “V” into the fork until they click. while still in parent mode.
Page 10
Push the apple until Step 11 Parts needed to complete this section you hear a "click" sound. Use P to unscrew the back Place and click I on rear screw (counter clockwise). axle. er the connector insert, slightly turn until you insert, Turn the apple to face you.
Page 11
Step 12-13 Parts needed to complete this section 15m+ 24m+ Unscrew the seat's screw. 15m+ 24m+ 15m+ 24m+ Take the seat J , push the screw through the seat hole. Screw into the most rear facing hole and firmly tighten with Allen key P .
Page 12
Step 14-15 Parts needed to complete this section WARNING: Ensure safety pin is inserted correctly and secured. a. Insert T into the (retaining hole) By using the "Allen" key (L), remove on the back of trike. Pull out the securing pin with b.
Page 13
Step 16-17 Parts needed to complete this section WARNING: Nut must be inserted correctly and secured. Keep the nut in place , Insert S into part T . Use V to screw the nut remove the screw from Align the hole of part S with clockwise.
Page 14
Usage/Utilisation Months+ To activate child control mode, 1 press the red parent control button. and turn the front wheel 180. 15M+ 24M+ Scan this code to watch a live guide -14-...
Page 15
Child Control 24 Months+ a Release the safety bar K by pressing the circles on the back of the seat. b and pulling it away from the handlebar stem. Push the release button to For the 24 Months+ stage, place it back into frame. fold up left and right footrests.
Page 16
Step 2: Secure the screw 24m+ at the second hole. 15m+ Release the bolt to remove the chair. WARNING: dangerous to leave your child unattended. Use a safety belt as soon as your child can sit unaided. This seat is not suitable for children under 15 months.
Page 17
Child Control 24 Months+ Without disengaging the lock, Feet may be injured! 15m+ 15m+ 24m+ 24m+ Scan this code to watch a live guide At 24 months, press the parent control button a and turn the wheel 180 b . Twist and press the pedals inward c while making sure they fit into the depression in the fork.
Need help?
Do you have a question about the Breeze 605 and is the answer not in the manual?
Questions and answers