Front Panel; Rear Panel - D-Link DSL-300G User Manual

Front Panel

Place the Modem in a location where the LED indicators can be easily viewed.
The LED Indicators read as follows:
Power
Status
ADSL: Link/Act
Ethernet: Link/ Act

Rear Panel

All cable connections to the Modem are made at the rear panel. The factory-reset button is located here as well..
ADSL port,
connect ADSL
cable here
Reset button
DSL-300G ADSL Modem User's Guide
Front Panel Display with LED Indicators
Steady green light indicates the unit is powered on.
Blinking green indicates normal operation.
Steady green light indicates a valid ADSL connection. This will light after
the ADSL negotiation process has been settled. Blinking green light
indicates an active WAN session.
Steady green light indicates a valid Ethernet connection. Blinking green
indicates an active Ethernet session.
Ethernet port,
connect
Ethernet cable
here
Power cord
connects here
2