Configuration Via Rs-485 - ICP DAS USA LC-101H User Manual

3. Configuration via RS-485

 The factory default settings for RS-485 communication
 Address: 1
 Protocol: Modbus RTU / DCON

Baud rate: Hardware Configuration: Fixed 9600 bps
Software Configuration: 1200 to 115200 bps

Data Format: N,8,1/O,8,1/E,8,1/N,8,2
Note
If there are multiple LC-101H/LC-102H connected to the same RS-485 network,
each module needs be set with a unique RS-485 address. More than one module
having the same address will cause communication failure
 Testing RS-485 Communication
1. Download the DCON Utility Pro from
ICPDAS web site :
2. Launch the DCON_Utility_Pro.exe.
https://www.icpdas.com/en/download/DCON_Utility_Pro
Stop Search
Start Search
Set COM port Configuration
LC-101H/LC-102H User Manual
- 14 -