Page 1
Monitor Desk Mount Instruction Manual V2.0 Model: HNCM16 Thank you for choosing this HUANUO product! At HUANUO we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.huanuoav.com/reviews if you are satisfied.
Page 2
IMPORTANT SAFETY INSTRUCTIONS •Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact customer service at support@huanuoav.com •Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at support@huanuoav.com •This product may contain moving parts.
Page 3
Supplied Parts and Hardware for Step 1 M8x12mm Bolt M5x14mm Bolt Pole C Clamp Plate C Clamp Plate f (x3) g (x2) a (x1) b (x1) c (x1) Locking Plate M10 Washer Spring Washer Grommet Plate j(x1) k(x1) l(x1) m (x1) Bottom Pad Medium Allen Key Small Allen Key...
Page 4
Supplied Hardware for Step 4 h (x1) Supplied Hardware for Step 5 Medium Allen Key o (x1) Step 1 Install the Pole to the Desktop Option A: Desk Clamp Assembly 1A-1 Medium Allen Key Small Allen Key 1A-2 Plastic Knob...
Page 5
Option B: Grommet Base Assembly Note: 1. If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk mount. 2. If there is no grommet hole on your desk, position the Pole (a) on the mounting surface and mark the hole.
Page 6
Step 3 Attach the VESA Plate to the Laptop Tray or Monitor For Monitor with Flat Back FLAT BACK MONITOR (UNIVERSAL MONITOR PLATE) For Monitor with Curved or Recessed Back CURVED BACK MONITOR (UNIVERSAL MONITOR PLATE) For Laptop...
Page 7
Secure the Monitor or Laptop Tray onto the Head of Swivel Step 4 4-1 Slide the monitor onto the head of 4-2 Secure the Nut (h). Make sure the nut Swivel Arm (d) as shown in the above is installed before you rotate the monitor. diagram.
Page 8
Step 6 Manage the Wires and Store the Allen Keys on Wire Clip...
Need help?
Do you have a question about the HNCM16 and is the answer not in the manual?
Questions and answers