FUXTEC FX-RL400 Assembly Instructions

Lawn aerator

Hide thumbs Also See for FX-RL400:

Assembly instructions FUXTEC Lawn Aerator FX-RL400

Assembly instructions

Please note before use:

Please read the instructions carefully and make yourself familiar with the device.

Please follow the assembly instructions step by step and check all parts for

completeness. To prevent damage to the components, please place them all on the

floor. Keep sharp-edged parts and packaging out of the reach of children. If parts are

dirty, please clean them with a duster; do not use abrasive cleaners.

The lawn aerator should not be knocked uncontrollably. The best results are achieved

when the lawn is slightly moist. Sufficient ventilation is achieved by increasing the

pressure on the lawn aerator via the hand guide.

Table of Contents

Do you have a question about the FX-RL400 and is the answer not in the manual?

Page 1 Assembly instructions FUXTEC Lawn Aerator FX-RL400 Assembly instructions Please note before use: Please read the instructions carefully and make yourself familiar with the device. Please follow the assembly instructions step by step and check all parts for completeness. To prevent damage to the components, please place them all on the floor.
Page 2 Assembly instructions FUXTEC Lawn Aerator FX-RL400 Warning Prevent contact with the ventilation mandrels. These are sharp and can cause serious injury if not used correctly. Maintenance Please clean the ventilation thorns and the wheels carefully after use. Store in a dry place.