Table of Contents
Advertisement
These features and specifications for the LP Cylinder MUST be present. If you exchange the LP cylinder, make sure
the new tank also complies with all the specifications listed here:
9.1 Kg/20 lbs capacity; 31.75cm/12.5-in diameter x 45.72cm/18-in tall
Type-1 gas cylinder valve outlet to accommodate the hose and regulator supplied with this appliance.
The Type-1 valve must prevent gas flow until a positive seal is obtained.
Over-Filling Protection Device (OPD) - indicated by a trilobular hand-wheel.
Collar to protect the cylinder valve. Required of any cylinder whose capacity is in excess of 1 Kg/2.2 lbs.
Safety Relief Valve
Protective cap
Cylinder must be arranged for vapor withdrawal (not shown).
CAUTION
Place dust cap on cylinder valve outlet
whenever the cylinder is not in use.
Only install the type of dust cap on the
cylinder valve outlet that is provided
with the cylinder valve. Other types of
caps or plugs may result in leakage of
propane.
LP Cylinder Valve
(Trilobular Hand-wheel
indicates OPD is present)
Protective
Collar
Safety
Relief
Valve
31.75cm/ 12.5-in Diameter
8
Protective
Cap
Type-1
Outlet
45.72cm/
18-in Tall
Advertisement
Table of Contents
