Table of Contents
Advertisement
5. Return frame assembly to upright position and fully
tighten leg bolts with a wrench.
6. Attach Hose to Burner: It is important to properly connect the orifice to the burner. The male hose connector with
orifice will screw directly into the burner. To attach, hold the air shutter up against the end of the burner. Place
the small end of the spring onto the male connector, and insert into threaded hole of the burner. Screw the male
connector into the burner until the spring is mostly compressed and connection is firm. The air shutter should be
allowed to turn freely, but still hold its position. ATTENTION: Do not cross-thread.
7. Read all instructions in this manual regarding the LP
Cylinder and Hose Valve Regulator before connecting
the cooker to the fuel supply.
*Fully Assembled Steamer Kit
Male Connector
with #59 Orifice
*Fully Assembled Boil/Steam Kit
6
Advertisement
Table of Contents
